How To Detect Termites – Termite Inspection Canberra

 How to Detect Termites – Termite Inspection Canberra

The CSIRO recommends termite inspection as a bare minimum an annual termite inspection is essential to every property owner in order to find out how to detect termites in the early stages. However, it must be done by an experienced, licensed and reliable pest control professionals, such as A1 Pest Control Canberra. In this article, we’ll guide you on what you can ask and what you must look for in a pest control service provider.

This article covered topics:

  • How to detect termites
  • How to lessen the risk of termites
  • The different approaches to termite inspection and management
  • Getting Quotations
  • Pest inspections
  • Requirements in licensing for pest controllers
  • Insurances
  • Warranties

In Australia, there are over 300 species of termites but only a few cause problems. The termite that causes the most damage is the white ants (subterranean termites). Any materials that have cellulose-containing materials such as timber are their main source of food.

Termites eat homes and commercial buildings timbers from the inside and leave only a thin layer as the guard from the outside environment, which causes major structural and economic damage.

termite inspection

How to detect termites?

Termite infestation leaves some indications such as follows:

  • Termites build mud shelter tubes, which can be seen in architraves or brick foundations. This serves as their protection.
  • Timber with the hollow sound
  • Doors and floors that sag
  • Weak door jams, architraves, or skirting boards. Termites weaken the structural integrity of timber, hence a slight pressure causes damage to these areas.
  • Cracked plaster or paint.
  • Power failures. The warmth of electrical fittings attracts termites.

There are several factors that affect termite inspection and activity. The factors that greatly impact their activity is the temperature, rainfall, and also the house’s age. If you find termite inspection activity in your home, do not disturb the termites as the termites will go deeper underground and move to another location and will be more difficult to detect.

Termites don’t only eat the structural timbers of your house, they also eat your furniture, fabrics, paper products, clothing, and non-cellulose materials such as building sealants, rigid foam insulation, and soft plastics.

  1. How to lessen the risk of termites?

  • Fix leaking pipes, poor drainage, and inadequate ventilation.
  • Check the house’s environment. The weep holes or the small gaps between the bricks should not be covered by garden beds or shrubs.
  • The areas under your house should also be clear. Do not stock items that reduce the ventilation space under the house.
  • Eliminate any wood that touches the ground and near or under the house.
  • Consider construction methods and materials that reduce risk of termites if you are building a new house.
  • Obtain annual pest control inspections and consider their advice to lessen your risk of termite inspection by installing chemical or physical termite barriers.

  1. The different approaches to termite inspection and management

The Building Code of Australia mandates all new homes and extensions to have a readily available termite inspection and management system in all areas except for Tasmania as the termite risk there is inconsequential. If your home is built after July 1995, you must have a ‘durable notice’ of treatment attached to a noticeable position in the building (near the meter box or near the entrance to a crawl space). Furthermore, the following information should be listed on the said notice:

Whenever building a new home or whenever doing a substantial renovation, you must ensure you install the appropriate physical or chemical barriers. The barriers are easier to install at the time of construction.

Physical termite barriers are permanent and non-toxic. It does not require maintenance or renewal. Although physical barriers won’t kill termites, it will prevent termites from accessing your home. Moreover, there are several types of physical barriers such as termite shields, woven stainless steel mesh, composite systems, and reticulation systems.

Types of Physical Termite Barriers

  • Termite shields or also known as ant caps easily detect the termite’s mud shelter tubes on its metal caps. Even if termite shields do not prevent termite inspection activity, it exposes them to the open.
  • Woven stainless steel mesh or finely graded stone particles conceal the entry points of termites. This can be installed around pipe openings and other similar openings in a concrete slab and cavity wall.
  • Composite systems are unlike genuine physical barriers as they will degrade over time. Examples of this type include chemically treated plastic or fabric sheets.
  • Reticulation systems involve fitted piping under the slabs and around the edges of a building with access points for insecticide injection.

Chemical termite barriers can be applied under, around a concrete slab or around the building piers or footings the termite inspection…

  • It creates a zone of treated soil that is good for many years.
  • If it is applied after construction, it will require trenching and concrete drilling the treatment we use is a product by BASF Termidor which has an 8-year $2M warranty against termites coming back which is a warranty that no other company will give.

Here are the chemicals used in termite inspection and management:

  • There is nothing that even comes close to Termidor read more about it HERE

Monitoring and bait stations

Monitoring and bait stations are a more expensive option due to the fact that they don’t stop termites they merely monitor them and in the long run, they work out to be more expensive and we recommend either chemical or physical barriers to be installed instead.

How termite baiting stations work:

  • Pest technician will place the baiting stations immersed at various at various dug in around the perimeter of the property grounds.
  • These stations will be checked regularly and if needed, they will be repositioned. When termites are found, the bait station is replenished.
  • The termites take the bait with them back to their colony, and spread the bait until the whole colony is eradicated.

It is not a good idea to use the monitoring and bait station as the only method of termite management because there is no guarantee that the termites will reach the bait.

  1. Obtaining Quotations

Termite treatment varies in cost depending on linear meter requirements for chemical barrier or physical barrier measurements and the product selected to do the job, price range $1,300 – $5,000. This price range given is for preventative treatment not taking into account another several thousand dollars for any damage repairs.

If there is a need for a termite treatment:

  • Call more than one pest control service provider before hiring one. Examine their company, their services and prices.
  • Differentiate the options available, quotations, and professionalism of those pest control service providers. Choose the one you are most comfortable with.
  • Study the type of solutions they offer. The cheapest solution may eradicate the termites in the short term while the more expensive approach may provide long and better protection.
  • Look for testimonials and reviews from previous clients or word-of-mouth advertisements. It is a great basis if you are about to hire a reliable pest control service provider.

Questions to ask pest control companies:

  • How many years has the company been established?
  • Are they a member of any industry association?
  • Do they have a latest license?
  • Do they have a latest professional indemnity and public liability insurance certificates?
  • What are the skills and experiences of their pest control technicians?
  • Do their pest control technicians undergo regular trainings?
  • Do they follow the requirements of the Australian Standard? (AS4349.3 provides guidelines for inspecting buildings for timber pests; AS3660.2 deals with termite management in and around existing buildings and structures).
  • How long will the inspection take? (It should only take 1.5 hours)
  • Will the inspection also cover borers and wood-decay fungi?
  • Will they provide a written report?
  • If termites are found, what treatment methods do they usually recommend?
  • Will they explain the products they’re likely to use?

  1. Pest and Termite Inspection

Termite inspection usually costs around $250 – $350, depending on the size, style and ease of access. Annual termite inspection is recommended, even more so if your house is located in an area with high termite risk.

Ensure you are present during the inspection so you can be free to ask questions as you go around the property.
Check the following are checked by the termite technician.

  • All accessible timbers under the house and under the roof
  • Inside and outside the building and its surrounding
  • Fences, gardens, trees and stumps
  • Any other timber structures and trees within the property (up to 50 meters from the main building)
  • The presence and effectiveness of visible and accessible termite barriers
  • The vulnerability of the property to termite infestation (sub-floor ventilation and drainage, obvious damp areas, etc.)

The pest inspection report should include the following:

  • Areas inspected
  • Areas not inspected due to inaccessibility
  • Termite activity
  • A termite inspection and the management plan if termite activity is found. The detailing methods, costs, assessment of all options and the expected outcomes and limitations should also either be written in the report or discussed at length with the property owner.

  1. Requirements in licensing for inspectors and pest controllers

Do you know that licensing requirements for timber pest inspectors vary from state to state and they do have different requirements for this? To be honest, asking the pest inspector about their experiences in managing timber pests is more important than just checking their license.

The Australian standards require a pest inspector to possess a certain amount of technical knowledge and experience. Second, they should have knowledge about local building practices and the habits of termites, such as where they’re likely to be found and different indications of manifestation.

In order for a timber pest inspector to gain that level of proficiency, they should possess these various elements:

  • They should have done a minimum of 40 timber pest reports under direct and appropriate supervision.
  • They should have completed a timber inspection course.
  • They should have capabilities in units 8 and 10 (that tackles specifically in inspecting, reporting, and controlling timber pests) from the National Pest Management Competency Standards (or similar experience).

Accreditation programs and industry associations

The Australian Environmental Pest Managers Association (AEPMA) is the major industry association that sets standards for the pest management industries. It represents pest managers and administrators PestCert so that one would know that a specific pest management company meets the accreditation standards.

In order for a pest company to gain a PestCert accreditation, a pest manager should first show exploratory learnings, skills, and experience with the up-to-date pest management technologies, practices, and tools. Secondly, they stick to the code of conduct. Lastly, one should be committed to maintaining ongoing professional development.

  1. Insurance

Upon getting quotes, request their professional indemnity and public insurance. You must also ask to see their certificates of currency.

  • Professional indemnity safeguards the pest control technicians against negligence claims resulting from quotations, inspections, and treatments conducted.
  • Public liability insurance safeguards the pest control technicians against injuries and property damages arising from work performed.

  1. Warranties

Learn about the various warranties behind each of the products that has been recommended to you. In the case of BASF Termidor chemical termite barriers, you should rest easy at night knowing that you have 8 years $2M protection against termites ever returning. Ask the technician about the different termite warranties and if it requires you to have annual termite inspections to keep the warranty valid.

Call our team who are termite professionals for all domestic and commercial termite inspection and management strategies and termite treatments on 0407 065 413.

Hoping you now know the importance of knowing termite inspection and what you need to do to prevent the termite inspection.

Comments

Post a Comment

Popular posts from this blog

Termite Inspections and Treatment

Image
      Termites   (regularly known as white subterranean insects) are quite possibly the most ruinous irritations in Australia. They cause a great many dollars harm to homes and designs all through Melbourne and Victoria consistently, which is the reason termite assurance is so significant.  As per CSIRO 1 of every 3 homes will be influenced by termites inside the monetary existence of the design. Termites are found in Melbourne and all through the entirety of Victoria, really regularly, the presence of these home intruders goes undetected until harm is found by some coincidence. This harm isn't covered by most insurance agencies, thusly it's ideal to guarantee all safeguard termite assurance techniques have been set up. Pest Control Canberra Do you think you have  Termites? In the event that you think you have termites or you have tracked down a suspect avoiding board or door jamb it is vital not to upset or tear open the harmed lumber or activities as the ...
Read more

Signs Of Termites Infestation

  Finding signs of termites infestation is hard to detect from a novice eye because termites feed on woods and attack from the inside. It makes a nonprofessional thinks that the wood is in a healthy state. Termites are hard to detect because they live in dark, humid, and protected places. You will not even notice that they have invaded your property until you lean on a doorframe, and it falls off. It is recommended to employ the expertise of the best Queanbeyan pest services to conduct an annual termite inspection. It is to check if termites are already there and prevent them by installing a barrier. Common Signs of Termite Infestation You can see or hear signs to recognize their presence, but mostly, we only see the damage and not the termites. Listed below are some common signs of Termite Infestation: Hollow sound on walls  – Termites feed on timbers, and your walls are made of wood. It could be a possible target. If you knock on your wall and you hear a hollow sound, it mig...
Read more

Australian Termite Species

  There are about 300 different species of termites in Australia, but fortunately, only a few of them cause damage to crops, timber, and other wood-based products. Almost every termite plays a significant role in the ecosystem through the recycling and decaying of other organisms, which serves as a source of food for plants and other organisms.  Termites have different feeding habits and food types. This has made it very easy to identify the species of termites that cause the infestation to create an avenue to provide the most effective control over them.  In this article, we will describe the three species of termite that are known to cause infestations in Australia. Types of termite species in Australian Termites are classified into three ecological categories based on their nesting and feeding habits; they are known as Subterranean, Drywood, and Dampwood. Subterranean termites The subterranean termites are termites that attack timber in buildings and are known as one o...
Read more